|
Type:Compact Integrated Stereo Amplifier
|
|
Power Output: 80W peak total (22W RMS/40W peak per channel), AES
|
|
Amplifier type: Dual Class A/B
|
|
Voltages: 110-240V, 50/60Hz auto-switching for worldwide voltages
|
|
Inputs: RCA and 1/8″ (3.5mm) mini-jack
|
|
Outputs: RCA variable preamp
|
|
Speaker outputs: 5-way binding posts
|
|
SNR: >95dB A-weighted
|
|
THD+N: <0.02% at all power settings
|
|
Crosstalk: <50db
|
|
Frequency response: 20Hz-22kHz +/-1dB
|
|
Input impedance: 10K ohms unbalanced
|
|
Input sensitivity: 410mV (max volume)
|
|
Protection: Output current limiting, thermal over-temperature, power on/off transient protection
|
|
Headphone Amplifier: Burr-Brown/TI OPA2134
|
|
Dimensions: 7″(H) x 2.75″(W) x 5.5″(D)
|
|
Weight: 3.55 lbs (1.6kg)
|
|
Finish options: Satin Black
|
|
Upstanding design
The vertical design of the N22 with its integrated stand allows the 22 watt/per channel stereo class A/B amplifiers to run cool through passive convection without a fan or massive heatsink. The N22 fits easily on your desk and doesn’t take up much space.
|
|
Discrete headphone amplifier
For headphone enthusiasts the N22 includes a high-performance, low-noise discrete amplifier which works well with all types of headphones and earphones.
|
|
USB power
The Audioengine N22 has a built-in power port for iPod charging while listening to your music. The USB connector allows you to charge and power your iPod, iPhone, Audioengine wireless adapters or any other USB powered product. USB is for power only, not USB audio or data transfer.
|
|
Variable line out
The N22 includes a variable preamp output so you can connect a subwoofer, external amplifier, or Audioengine wireless adapter and control the volume of the line-out from the front panel.
|
|
Simple operation
Both audio inputs on the N22 are active so two audio sources may be connected to the amplifier at the same time without the need for an input switch. A standby idle mode is also included to conserve power when you’re not playing music.
|
|
Wireless rear speakers
Use the N22 amp, Audioengine P4 passive speakers, and our W3 wireless adapter for a low-cost but great-sounding wireless rear channel setup for your home theater.
|
